{"id":9600,"date":"2016-08-27T13:17:10","date_gmt":"2016-08-27T18:17:10","guid":{"rendered":"http:\/\/u257280700-yesilovewalmart-com.hostingerapp.com\/?page_id=9600"},"modified":"2020-11-12T22:22:34","modified_gmt":"2020-11-13T03:22:34","slug":"giant-bubble-tips","status":"publish","type":"page","link":"https:\/\/yesilovewalmart.com\/giant-bubble-tips\/","title":{"rendered":"GIANT Bubble Tips"},"content":{"rendered":"
To make GIANT bubbles, tilt the wand down toward the screw eye.\u00a0 The ropes should slide down to the end.<\/p>\n Dip the ropes completely in a large container of bubble solution.\u00a0 Don\u2019t stir it around or it creates lots of suds \u2013 just dip it.<\/p>\n Lift the wand out of the solution.\u00a0 Allow any excess solution to drain back into the container.<\/p>\n Level out the wand so that the bottom loop is as large as possible.\u00a0 The wider that bottom loop, the bigger the bubble.<\/p>\n Slowly walk forward.\u00a0 (Fast movement can pop the bubble.)\u00a0 Or you can gently wave the rope to push the bubble out.<\/p>\n Walking forward or a gentle wave makes a long bubble that is attached to the wand. Walking it across a long distance creates very long bubbles.<\/p>\n To release a bubble from the wand – tilt the wand downward to close the loop.<\/p>\nFor best results<\/u>, make these bubbles on a day that is very humid, cloudy, and not windy<\/strong>.\u00a0 You don\u2019t want to do it on a dry, sunny, or windy day.<\/p>\n
Raise it up so that the plastic ring on the wand slides back toward your hand and the loop opens.\u00a0 There should be a film of bubble solution across the opening of the loop.<\/p>\n
When the wand\u2019s plastic ring is down on the dowel (away from the screw eye) the lower rope\u2019s loop opens up wide like this.\u00a0 Sometimes bubbles will come out of the top loop as well.<\/p>\n